Professional LED Pot Light Installation in Calgary by a Licensed Journeyman Electrician. We provide clean, code-compliant recessed lighting for kitchens, basements, and living rooms. Our energy-efficient LED upgrades include IC-rated fixtures and a dust-free installation guarantee.
Installation service up to code
Renovations
Retrofits
New construction
• IC-Rated Safety: We only use fixtures rated for direct contact with insulation to prevent fire hazards.
• Vapour Barrier Gaskets: Crucial for Calgary homes to prevent heat loss into the attic.
• No-Mess Guarantee: We use specialized dust-collection shrouds when drilling to keep your furniture clean.
• Dimmable Comfort: Control the mood of your room with high-quality LED dimmers.
• Color Selection: We install "Selectable CCT" lights (Choose from Warm, Neutral, or Cool White).
• Energy Savings: Reduce your power bill with long-lasting, low-wattage LED technology.
Pot lights installation
• IC-Rated Fixtures: We only install "Insulation Contact" rated lights, which are safe to be in direct contact with your home's attic insulation.
• Vapour Barrier Integrity: In Calgary’s climate, maintaining the vapour barrier is critical to prevent heat loss and moisture. We use proper gaskets and seals.
Break down the benefits for the homeowner:
• Energy Efficiency: Lower your electricity bills with long-lasting LED technology.
• Custom Ambience: We install dimmer switches and "selectable CCT" lights (choose between Warm White, Natural, or Cool White).
• Low Profile: Perfect for basements, kitchens, and living rooms with low ceilings.
• No Mess Install: We use specialized tools to ensure clean cuts and minimal ceiling disruption.
Recessed lighting installation, specialist in finished ceilings, code compliant, fishing cables between floors, attic, new switch
Before
In process
After
Specialist in finished ceilings and retrofits
Safe drill through trusses (never drill blind)
Inspection camera available
𓃍
Installing pot lights in a finished ceilings comes with some risk when fishing cables across wooden joists - here is when expertise and experience are most needed to avoid damage and unnecessary expenses and delays
⚠️ Electrical cables
⚠️ Gas lines
⚠️ Drain pipes
⚠️ Heating ducts
Scan the ceiling structure and find joist direction, cable routing, and switching
Lay out the ceiling to have a better idea of how your pot lights will look
Before starting to drill, we protect your floor and furniture
Installing pot lights in a finished ceilings need to accommodate electrical cables form light to light and have to be run through floor joist either wood joist and/or i-joist(engineered joist)
Installing pot lights in a finished ceilings need to fish electrical cables in the attic and needs to deal with insulation is recommended to wear mask and eyes protection, in this case pot lights need to be rated IC (insulation contact) also be rated for damp locations with a gasket around the pot light to prevent the moisture leak
Installing pot lights without drywall damage on walls and ceilings is possible depends the structure of the ceiling, walls and adjacent rooms to run a new cable from the wall switch to the ceiling without cutting access holes
Sometimes is not easy to reroute cables because the wire is stapled to the joist
Refresh your kitchen, living room, bathroom, or any room of your home
Add a functionality, clean and stylish look. Go to any decor
Open up the space look bigger and the ceilings higher because doesn't take much space compared to surface mounted fixtures
It can increase the amount of light in a room
Increase your home value and make more desirable to buyers
Highlight artwork of other features
Ideal for low ceilings
Pot light dimmers reduce energy consumption
Make a few holes as possible to reduce risk
Never drill trusses without knowing what is behind
All junction boxes must be accessible, never buried inside the drywall
﹎
For ceilings with existing switch
Color select: warm white (2700K), cool white (4000K), daylight (5000K)
Dimmable
IC rated (insulation contact)
13 W (65 W) Brightness (lumens): 750
Indoor and outdoor (damp and dry outdoor locations)
CUL certified
ENERGY STAR® certified
﹎
No ceiling light? No switch?
We can add a new wall switch to control the lights
Add new wall switch $150 (standard decora switch)
Add dimmer $60
WIFI dimmer switch available
a week agoNEW
Positive: Professionalism, Punctuality, Quality, Responsiveness, Value
★★★★★
I had ranzo came in and install my pod lights tv . I had no light in living room so it took him sometime to get it finish. He was so patient. His work was neat and clean. He didn’t cut any dry wall in the living only in closet which is not visible and he covered it completely so you cant see its visible. He also installed brand new switch for me.. i wound really recommend him. Really happy with his services..
Services: Relocate outlets or switches, Mount TV, Repair drywall, Install outlets or switches
★★★★★
Renzo came by to remove a big chandelier that was very difficult to get down and to install a pot light in it’s place. He made it known that he usually does not deal in these kinds of take downs and repairs but did a wonderful job nevertheless! I would definitely recommend him to friends and family.
★★★★★
Renzo did a amazing job . I had been look to get more ceiling lights for my living room for quite some time now found Renzo contact info online called him and he was here same day for a free quote he explained everything in detail regarding what needs to be done. After I purchased the lights he was there next day for the installation and I was very satisfied with his work. He is friendly and very professional at his work. Will be calling him again soon for my backyard lighting. Highly recommended!!!